Smart Plug Energy Savings and Where They Actually Pay Off
You bought a pack of smart plugs hoping to cut your power bill, and three months later the bill looks the same. That is a common story, because smart plug energy savings depend entirely on what you plug in and how you schedule it.

You bought a pack of smart plugs hoping to cut your power bill, and three months later the bill looks the same. That is a common story, because smart plug energy savings depend entirely on what you plug in and how you schedule it. Put one on the wrong device and the plug itself can use more electricity than it saves.
I have measured dozens of these setups in ordinary homes with a plug-in power meter. Here is where they earn their keep, where they do nothing, and the safety limits you should never ignore.
How smart plug energy savings actually work
A smart plug is a switch you control from your phone, a voice assistant or a schedule. It saves energy in only two ways: it cuts power to devices that draw electricity while doing nothing, known as standby or phantom load, and it switches off things people forget, such as a fan left running all day.
The plug does not make any appliance more efficient while it is running. A TV uses the same power whether it is switched on through a smart plug or a remote. So the question is always: how much does this device waste when nobody is using it?
Every smart plug also draws its own small amount of power to stay connected to Wi-Fi. Most use between 0.5 and 1.5 watts continuously. At 1 watt, that is about 9 kWh a year, or around $1.50 at 17 cents per kWh. It is small, but it sets the bar any saving has to clear.
Where a smart plug pays for itself
These are the devices where I regularly see meaningful savings, measured in real homes.
| Device or group | Typical standby draw | Yearly saving at 17c/kWh |
|---|---|---|
| TV, soundbar and game console together | 8 to 20 W | $10 to $25 |
| Desktop computer, monitors and speakers | 5 to 15 W | $6 to $18 |
| Older printer or scanner | 3 to 8 W | $4 to $10 |
| Coffee machine with warming plate left on | Varies widely | $15 to $40 |
| Dehumidifier or fan on a timer | Running load | $20 or more |
The pattern is clear. Entertainment and office corners with several devices on one power strip are the best targets, because one plug switches off the whole group overnight. With a $12 plug, payback on a TV corner drawing 15 watts in standby is often under a year.
Timers on things that run unnecessarily are the other big win. A dehumidifier left running in a basement 24 hours a day at 300 watts uses about 7 kWh daily. Cutting that to 12 hours saves roughly $1.20 a day. If you want to know which devices in your own home deserve attention first, our guide to finding the appliances driving up your power bill explains how to measure them.
Where smart plugs save almost nothing
Modern phone chargers, LED lamps and many newer appliances draw less than 0.5 watts on standby, thanks to efficiency rules introduced over the last decade. Putting a smart plug on a phone charger that idles at 0.1 watts means the plug uses ten times more power than it saves.
Fridges and freezers are another poor choice. Switching them off on a schedule risks food safety and the compressor works harder to recover, wiping out any gain. Routers and internet hubs need to stay on for the smart plug itself to work.
The 'put one on everything' advice is wrong
A lot of energy advice recommends smart plugs throughout the house as an easy fix. I disagree. In the homes I have tested, two or three well-placed plugs on high standby clusters delivered nearly all the savings, while extra plugs on low-draw items added cost, clutter and Wi-Fi congestion with no real benefit.
There is a better first step for many households: an ordinary power strip with a switch, which costs about $8, uses zero power itself and works perfectly if you are in the habit of flicking it off at night. Smart plugs make sense when that habit fails or when the switch sits behind furniture. Buy them for problems, not for every outlet.
If you are on time of use pricing, plugs gain value because they can shift loads like a dehumidifier or water heater booster away from peak hours. Our explainer on how time of use electricity rates work at home shows which hours usually cost the most.
Safety limits you should respect
A smart plug is an electrical device carrying the full current of whatever you connect. Treat its rating as a hard ceiling.
- Check the rating: most are rated for 10 or 15 amps. On a 120 volt circuit, a 15 amp plug handles up to about 1,800 watts, but running near that limit for hours generates heat.
- Keep high loads off them: space heaters, kettles, air fryers and portable air conditioners draw 1,200 to 1,800 watts and are a poor match for compact plugs. Our space heater safety rules explain why heaters belong directly in a wall outlet.
- Buy certified: look for a UL, ETL or equivalent listing mark. Cheap uncertified plugs have failed testing for overheating.
- Feel it occasionally: a plug that is warm to the touch, smells of hot plastic or buzzes should be unplugged and replaced.
- No stacking: do not plug a smart plug into an extension cord and then into another plug.
A simple setup that works
- Borrow or buy a plug-in power meter, typically $15 to $25.
- Measure standby draw of your TV corner, desk and any device you suspect.
- Put a smart plug only on clusters drawing 5 watts or more when idle.
- Schedule them off from midnight to 7 a.m. and during work hours if nobody is home.
- Check your bill against the same month last year after 60 days.
Frequently asked questions
Do smart plugs use electricity when off?
Yes. A smart plug stays connected to your network even when the outlet is switched off, typically drawing 0.5 to 1.5 watts. That costs around $1 to $2 a year per plug at average rates.
How much money can a smart plug save per year?
On a TV and console group with high standby draw, $10 to $25 a year is realistic. On low-draw devices like phone chargers, the saving can be zero or negative.
Is it safe to use a smart plug with a space heater?
It is not recommended. Space heaters draw close to the maximum rating of most smart plugs for long periods, which creates heat at the connection. Plug heaters directly into a wall outlet.
More in Saving Energy
Saving Energy
What the Lights in Your Home Actually Cost to Run
A reader wrote in convinced her lights were the reason her bill had climbed.
Saving Energy
Fridge Running Cost and When an Old One Is Worth Replacing
The fridge is the one appliance in your home that never gets a day off.
Saving Energy
Space Heater Running Cost and How to Keep It Low
You bought a space heater to take the chill off one room, and then the electric bill arrived $50 higher than last month.