Charging Controllers and Handhelds Without Hurting the Battery
A reader sent me a photo last winter of his daughter's Nintendo Switch. The screen had lifted away from the back casing by about two millimetres along one edge, and the kickstand no longer closed.

A reader sent me a photo last winter of his daughter's Nintendo Switch. The screen had lifted away from the back casing by about two millimetres along one edge, and the kickstand no longer closed. She charged it every night under her duvet, plugged into a phone charger from a petrol station. The battery inside had swollen, and he caught it before anything worse happened.
Most households now have more rechargeable batteries in games kit than in any other category of device: two or three controllers, a handheld or two, wireless headsets. They all get charged in the most casual way possible, wherever there is a free socket. That is usually fine. A few habits, though, shorten battery life sharply, and a small number create a genuine fire risk.
What is inside and why heat matters
Almost every modern controller and handheld uses a lithium-ion or lithium-polymer battery. The DualSense controller has a pack of about 1,560 mAh. Each Switch Joy-Con holds about 525 mAh, and the Switch console itself around 4,310 mAh. The Steam Deck carries a 40 watt-hour pack, roughly ten times the energy of a controller.
Lithium cells age faster when they are hot and when they sit at a full charge. The two together are the worst combination. A controller charged to 100 percent and left on a warm console vent, or a handheld charging while running a demanding game, wears its battery much faster than one charged on a cool desk. In my own house, a DualSense that lived on top of the console lost noticeably more run time in eighteen months than an identical one kept on a shelf.
Swelling is the visible sign of a cell breaking down. Gas builds up inside the pouch and pushes the case apart. On a Switch you see the screen lifting; on a Joy-Con, a gap at the rail; on a controller, triggers that start to stick or a shell that no longer closes flush.
The chargers that cause the trouble
Most of these devices charge over USB, so people assume any USB charger will do. For simple controllers, a reputable phone charger is generally fine because the controller itself limits how much current it draws. For handhelds, it is more complicated. The Switch's official charger supplies 15 volts at 2.6 amps using USB Power Delivery. The Steam Deck's supplies up to 45 watts. A weak charger will simply charge slowly, which is harmless. A poorly made one is where the risk lives.
Cheap unbranded chargers sometimes negotiate USB Power Delivery badly, skip proper insulation between mains and low voltage, or omit thermal protection altogether. I have opened a few, and the gap between the mains side and the USB side on one was smaller than the thickness of a credit card. If a charger is unusually light, has no manufacturer's name, or lacks the safety markings for your country, such as UKCA or CE in the UK and Europe or a UL listing in North America, I would not use it on anything left charging unattended.
The charger is the part of the system that touches the mains. That is where to spend the extra few pounds.
Where and when to charge
The bed is the worst place. Duvets, pillows and sofa cushions trap heat and are flammable, and you are asleep and not noticing. Charge on a hard surface, away from paper and fabric, ideally somewhere you would see or smell a problem. A desk, a kitchen worktop or a shelf in a living room all work.
Avoid stacking chargers on a crowded extension lead behind a television. Low-power chargers rarely overload a lead on their own, but adding them to a console, a TV and a soundbar on a cheap strip is how people end up with warm plugs. We covered the limits in more detail in extension lead safety for gaming setups and in our piece on why an overloaded power strip overheats.
The advice to always drain the battery first is out of date
Some people still run controllers flat before recharging, a habit that made sense for old nickel-cadmium batteries and their "memory effect". Lithium cells do not have that problem, and deep discharges actually stress them. Topping up when convenient is better.
The more useful rule is to avoid sitting at 100 percent for long periods. Several devices now help with this. Recent SteamOS versions on the Steam Deck let you cap the charge level in the power settings, and some Windows handhelds include a similar limit in their companion software. For a handheld that mostly lives on the dock, I would use that cap if it exists. For controllers, it is enough to unplug them once they are full rather than leaving them on the cable all week.
A rough guide for the devices in most homes
| Device | Typical charger | Habit worth keeping |
|---|---|---|
| DualSense or DualShock 4 | Any reputable 5 V USB charger or the console | Unplug when full; avoid charging on the console vent |
| Xbox controller | AA cells or a rechargeable pack | Use quality rechargeable AAs; remove cells if stored for months |
| Switch Joy-Con | Charge on the console or a charging grip | Check the rail gap every few months for swelling |
| Nintendo Switch | Official 15 V USB-C PD adapter or certified equivalent | Do not charge under bedding; dock in an open space |
| Steam Deck and PC handhelds | Official 45 W adapter or certified PD charger of similar rating | Use the charge limit setting if the device stays plugged in |
These are general habits rather than manufacturer instructions; the manual for your device always takes priority.
If you find a swollen battery
Stop charging it straight away and do not press the case closed. Move the device to a hard, non-flammable surface, away from anything that could burn, and leave it unplugged. Do not puncture or try to remove the battery yourself unless you know what you are doing; a pierced lithium pouch can catch fire within seconds. Contact the manufacturer, since swollen batteries are sometimes repaired under warranty, or take the device to a repair shop. Never put it in a household bin. Most recycling centres and many electrical shops accept lithium batteries separately. For a broader look at keeping devices going longer, see how to make your appliances last longer.
A ten-minute check tonight
Gather every controller and handheld in the house onto a table. Look at each one from the side for gaps, bulges or a screen that is not flush. Then look at the chargers: put aside any without a manufacturer's name or a safety marking, and move any charging station off beds, sofas and console vents onto a hard surface. If any device shows swelling, unplug it and set it aside for repair or recycling before you go to bed.
More in Games
Games
What Keeps Online Game Servers Running
When an online game loads instantly at three in the morning and a result lands on time to the second, it is easy to forget how...
Games
What Online Game Overheat Warnings Teach About Overloaded Sockets at Home
Plenty of games have a heat gauge. Push an engine, a weapon, or a reactor too hard and a meter climbs toward red, a warning...
Games
How Game Generator Builds Teach About Backup Power
Survival and base-building games almost always reach a point where you build a generator and decide what it will keep alive...