Beedlectrics logo BeedlectricsHome electrics explained safely and simply
Appliances

Standby Power: Which Appliances Still Cost You Money

I bought a plug-in power meter for $22 last spring because I was tired of guessing. Over six weeks I measured everything in my flat that stays plugged in, one device at a time, and the results killed a habit I had kept for years.

A plug-in energy meter between a wall outlet and a set-top box showing a standby wattage reading, with a notebook of readings beside it

I bought a plug-in power meter for $22 last spring because I was tired of guessing. Over six weeks I measured everything in my flat that stays plugged in, one device at a time, and the results killed a habit I had kept for years. The phone charger I had been dutifully unplugging every morning drew 0.08 watts with nothing attached, which works out to about 12 cents a year. The cable box in the living room drew 17.4 watts doing nothing at all, every hour of every day, which came to roughly $26.

Standby power is real, and the advice people give about it is aimed at the wrong devices. Pulling plugs at random around the house produces a lot of inconvenience and almost no saving, while two or three genuine offenders sit there unnoticed because they look like they are off.

What the numbers actually look like

Everything below is from my own meter or from the nameplate data on the device, converted at 17 cents per kilowatt hour. Check your own rate on your bill, because the spread between regions is wide enough to change which of these is worth bothering with.

Device on standbyMeasured drawCost per year
Cable or satellite set-top box, always on14 to 22 W$21 to $33
Older desktop computer in sleep, with a mechanical drive5 to 9 W$7 to $13
Games console left in instant-on or rest mode8 to 15 W$12 to $22
Inkjet printer, idle but powered3 to 6 W$4 to $9
Soundbar with network features enabled2 to 5 W$3 to $7
Modern smart television, screen off0.5 to 2 Wunder $3
Microwave with a clock display1 to 3 W$1.50 to $4.50
Phone or laptop charger, nothing attached0.05 to 0.3 Wunder 50 cents
Washing machine, cycle finished0.2 to 0.5 Wunder 75 cents

Look at the shape of that list. The top three lines account for more standby waste in a typical home than everything below them put together. Chargers and finished washing machines, the two things people are told about most often, are rounding errors.

The reason is regulation rather than virtue. Efficiency rules in most markets now cap standby consumption for new equipment at about half a watt to a watt, and manufacturers design to the cap. Anything made in the last decade without a network connection sips power when off. The exceptions are devices that keep a radio or a tuner awake on purpose, which is precisely what a set-top box and a networked console do.

The advice I think is mostly wrong

You will read that phantom loads account for something like ten percent of a household's electricity, and that the fix is to unplug everything you are not using. The first part was closer to true fifteen years ago. The second part is still repeated and it has three problems.

It wastes your attention on the cheapest items. Unplugging four chargers every night for a year saves about two dollars, and if the habit means you occasionally wake up to a dead phone, you have paid for that saving in a currency you care about more.

It can damage equipment and data. Pulling the plug on a desktop in sleep rather than shutting it down risks the file system. A printer that loses power mid-idle runs a head cleaning cycle on the next startup, which uses ink worth more than a year of its standby draw. I did this to an inkjet twice before I worked out what the clicking noise was costing me.

And it sends people after things that must not be unplugged. Refrigerators and freezers are the obvious case, and anyone wondering where their real kitchen consumption goes should read our note on refrigerator energy use instead. Less obviously, a condensing boiler or heat pump may rely on standby power for its frost protection in winter, a security system needs its charger to keep the backup battery topped, and a smoke alarm on a wired circuit is not something to experiment with.

The better instruction is narrower. Find the handful of devices in your home drawing more than five watts while off, and fix those specifically. Leave the rest alone.

How to find your own offenders in an afternoon

A plug-in energy meter is the only tool needed and the cheap models are accurate enough for this. Spend $20 to $30, avoid the ones that cannot read below one watt, and plug it in between the outlet and the device.

Work through the house with the device switched off at its own button, which is the state you are measuring. Write the number down next to the device name, because you will not remember eleven readings. Leave the meter on anything that cycles, like a printer or a networked speaker, for at least ten minutes, since a device that averages four watts may show zero for a minute and eleven for the next.

Three shortcuts help if you do not want to buy a meter. Feel the power brick: a transformer that is warm to the touch when the device is off is doing something, and warmth is wasted energy. Look for anything with a clock, a standby light, a remote control receiver, or a network connection, since all four require a live circuit. And check the back of the device for a nameplate figure, which is the maximum rather than the standby number but tells you the order of magnitude.

Smart plugs with energy reporting work too and have the advantage of logging over days instead of minutes. They do add their own small draw, usually under a watt, which is worth remembering before you fit nine of them to save three watts.

Fixes that stick

For the set-top box, the honest fix is usually to get rid of it. If you watch through apps anyway, returning the box to the provider removes the single largest standby load in most living rooms. If you keep it, check the settings menu for a deep standby or eco mode, which trades a slower startup for a much lower idle draw, and look at whether the box is recording overnight programmes you never watch.

For a games console, turn off the instant-on or rest mode in the power settings. You lose background downloads and a faster resume. On the two consoles I have measured, you gain between ten and twenty dollars a year.

For a cluster of desk or entertainment equipment, a switched power strip is the simplest answer: one rocker switch kills the printer, the speakers, the monitor and the dock together. Put it somewhere you can reach without crawling, because a switch you cannot reach never gets used. Do keep the strip sensibly loaded rather than treating it as extra outlets, which is a separate and more serious issue covered in why an overloaded power strip overheats.

Across a flat like mine the whole exercise took an afternoon and cut about $55 a year, nearly all of it from two devices. That is a modest number and I would rather state it plainly than inflate it. It is also permanent, requires nothing of me daily, and sits alongside the other habits in using home appliances safely and efficiently.

FAQ

Does leaving a charger plugged in cost anything?

Almost nothing. A modern charger with no device attached draws a fraction of a watt, which is a few cents a year. There is a small fire argument for unplugging damaged or counterfeit chargers, and that is a better reason than the electricity bill.

Which appliance has the highest standby draw?

In most homes it is the set-top box or a games console left in rest mode, at roughly 10 to 22 watts continuously. Both stay awake deliberately, one to keep its tuner and guide updated and the other to download in the background.

Should I unplug my television at night?

Not worth it for a set made in the last ten years, which uses half a watt to two watts with the screen off. If it is part of a cluster with a soundbar, console and streaming stick, switching the whole strip off makes more sense than the television alone.

Do smart plugs save more energy than they use?

Only when they are controlling something with a real standby draw. A smart plug uses roughly 0.5 to 1 watt itself, so putting one on a device that idles at 0.3 watts makes your consumption worse. Use them on the big items and use a manual switch on the rest.

MS
Meline Sarkisian

Meline covers lighting and energy saving at home, focused on practical changes that improve comfort and cut bills.

More posts by Meline

More in Appliances

01doorganico 084goad 3hot8 4465456 after5internprogram ahandfulofblessings ahmadpc ahomcybersecurity allodialresources annodex antiquesandperiodcollectibles aotc asianworldkashmir bloggertemplatefree bluefeatheragency bodyweightsolution campaign08blog carfixadvisor catstreetcollective cbstvsports cnfanspurchasing committeeof500yearsofdignityandresistance covertopsdjs cs-kaiyuangame cuestacomunicaciontotal cxoutlet dancebetgame deskgearhub destinyvillastay detectmagazine di33 diamondsteelbuildings donmo dyanadropship emarsysfinance emimattl escapechan eskitarih evautoplay everythingweddings-orlando farmzone feedviewerapp foxstudiosscratch gamevui123 gleasongrade greetingsday hacklabasu haskell iw-kaiyun jagoanproperti jilidskripsi joltbusinessfinance juegodepokergratis juegospucca kaeru-festival latestmehndidesigns lestanzediottaviano litemagazines localcommunityhero lustrsazan mariashebets menswheels newwebstechs1 nikkit ootheday oxigenvpn plurfitness prefetial probudgetcarpetcleaning psychicmrsmartin pyaten qvantor rejoignezlogis rexzbot riselayouts ruchin rwxqsgd5 sakaltime shibiaowang shop-bot skrtips spotlesshaven strcoding tetapatrium topselller uneplanteartificielle vipertechcr webtech1223411 wo-kygaming yamaha-mekar yeknava yoybuysheets zenunwa yamaha-mekar jilidskripsi ankertoto ankertoto ankertoto